MPS Solar Thermal Collectors
|
Product: 100750 |
Product: 100800 |
Product: 100850 |
|
Ideally suited for packaged Solutions :(solar kits) |
All-rounder, ideally suited for auxiliary-heating as well as medium sized thermal systems:Domestic |
All-rounder, though especially suitable for larger solar thermal systems:Commercial; Swimming Pools, Farms, Hotels etc |
|
Laser-welded aluminium absorber |
Laser-welded aluminium absorber |
Laser-welded copper absorber |
|
meander pipe ( ⌀12 x 0.5) |
10 harp pipes (⌀ 8 x 0.4) and 2 collector pipes (⌀ 18 x 0.8) |
meander pipe (⌀ 9 x 0.4) and 2 collector pipes ( ⌀ 22 x 0.8) |
|
2 connections at top, along length or on front |
2 connections at top, on front |
4 connections (2 on each length) |
|
Powder coated aluminium frame (75 mm section height) |
Powder coated aluminium frame (95 mm section height) |
Powder coated aluminium frame (95 mm section height) |
|
3.2 mm solar clear glass with 88% transmission |
3.2 mm solar clear glass with 91% transmission |
3.2 mm solar clear glass with 91% transmission |
|
absorber area 2.29m² |
absorber area 2.29m² |
absorber area 2.29m² |
|
gross collector area 2.51m² |
gross collector area 2.51m² |
gross collector area 2.51m² |
Flat Plate Solar Water Heating System - Features
• Product looks stylish and of high quality – it is a completely sealed unit.
• Unique vent system on each corner—the biggest problem with water and solar is condensation, panels are slower in the morning when full of condensation—the sun will dry this up but it means it takes longer for the
system to get to 100% efficiency. MPS systems uniquely have a air flow running diagonally from top to bottom that keeps them free from condensation.
• There is a knockout on the base of the unit so any water inside can escape -meaning the heating insulation will not rot or smell.
• The frame is bent out of one continuous piece of aluminum which makes it 5 times stronger for high wind forces. The absorber is held in place by springs at each corner so in shipping or installation it will not move more than it is supposed to.
• Thermal bridge - copper and aluminum expand at different rates—our collectors design takes this in to account so there is less risk of buckling or cracks in the tubes.
Technical data
|
Product |
100750 |
100800 |
100850 |
|
Type of construction |
Flatplate collector for on-roof, flat roof and facade mounting |
Flatplate collector for on-roof, flat roof and facade mounting |
Flatplate collector for on-roof, flat roof and facade mounting |
|
Measurement |
2160 x 1150 mm |
2160 x 1150 mm |
2160 x 1150 mm |
|
Gross area |
2.51m² |
2.51m² |
2.51m² |
|
Height |
75mm |
75mm |
75mm |
|
Absorber area (net) |
2.29m² |
2.51m² |
2.51m² |
|
Total weight dry |
37kg |
38kg |
39kg |
|
Liquid content |
1.73 L |
1.13 L |
1.70 L |
|
Nominal flow |
80l/h (low flow cond:40l/h) |
100l/h (low flowcond:50l/h) |
120l/h (low flow cond:50l/h) |
|
Nominal pressure loss |
160 mbar (low flow conditions:80 mbar, water/propylene-glycol 20°C) |
4mbar (low flow conditions: 2 mbar, water 20°C) |
280 mbar (low flow conditions: 90 mbar,water/propylene-glycol 20°C) |
|
Hydraulic connection |
Series connection with collectors side-by-side |
Series connection with collectors side-by-side |
Parallel connection with collectors side-by-side |
|
Collector connection |
2 connectors at top, 12mm for compression fittings incl. corrugated pipe set |
Plug connection with O-ring sealing, incl. pipe set |
Plug connection with O-ring sealing, incl. corrugated pipe set |
|
Absorber type |
absorber with Al-sheet and serpantine ⌀ 12mm |
absorber with Al-sheet, 10 harp tubes ⌀ 8 mm and 2 manifolds ⌀ 18mm |
absorber from copper, with 1 serpantine ⌀ 9mm and 2 manifolds ⌀ 22mm |
|
Absorber coating |
Highly selective on aluminium (eta plus_al) |
Highly selective on aluminium (eta plus_al) |
Highly selective on copper |
|
Absorption/ Emission |
95% / 5% |
95% / 5% |
95% / 5% |
|
Covering |
Low iron, clear, solar safety glass (ESG) |
Low iron, structured, solar safety glass (ESG) |
Low iron, structured, solar safety glass (ESG) |
|
Transmission of covering |
88% |
91% |
91% |
|
Impact resistance of covering |
Cover passed optional impact resistance tests following EN12975-2 |
Cover passed optional impact resistance tests following EN12975-2 |
Cover passed optional impact resistance tests following EN12975-2 |
|
Heat insulation |
Mineral wool 30 mm |
Mineral wool 50 mm |
Mineral wool 50 mm |
|
Collector case |
Aluminium frame powder coated |
Aluminium frame powder coated |
Aluminium frame powder coated |
|
Efficiency |
e ta 0: 77.6% related to the aperature area |
e ta 0: 80.1% related to the aperture area |
e ta 0: 77.5% related to the aperture area |
|
Heat loss coefficient |
a1(k1) 3,95 W/ (m²K) |
a1 (k1) 3,65 W/ (m²K) |
a1(k1) 3,73 W/ (m²K) |
|
Heat loss coefficient |
a2 (k2) 0,0165 W / (m² K²) |
a2 (k2) 0,0169 W / (m² K²) |
a2 (k2) 0,0152 W / (m² K²) |
|
Max stagnation |
191℃ |
206℃ |
205℃ |
|
Max op. Pressure |
10 bar |
10 bar |
10 bar |
|
Guarantee |
6 years for functionality and weathering resistance |
6 years for functionality and weathering resistance |
6 years for functionality and weathering resistance |
Created by Spoton Corporation: website design from Devon
